1Department of Environmental Science and Engineering, California Institute of Technology, Pasadena, CA, USA
2Division of Chemistry and Chemical Engineering, California Institute of Technology, Pasadena, CA, USA
anow at: CIRES, University of Colorado, and NOAA Earth System Research Laboratory, Boulder, CO, USA
bnow at: South Coast Air Quality Management District, Diamond Bar, CA, USA
*These authors contributed equally to this work.
Received: 29 Aug 2016 – Discussion started: 22 Sep 2016
Abstract. Flow tube reactors are widely employed to study gas-phase atmospheric chemistry and secondary organic aerosol (SOA) formation. The development of a new laminar-flow tube reactor, the Caltech Photooxidation Flow Tube (CPOT), intended for the study of gas-phase atmospheric chemistry and SOA formation, is reported here. The present work addresses the reactor design based on fluid dynamical characterization and the fundamental behavior of vapor molecules and particles in the reactor. The design of the inlet to the reactor, based on computational fluid dynamics (CFD) simulations, comprises a static mixer and a conical diffuser to facilitate development of a characteristic laminar flow profile. To assess the extent to which the actual performance adheres to the theoretical CFD model, residence time distribution (RTD) experiments are reported with vapor molecules (O3) and submicrometer ammonium sulfate particles. As confirmed by the CFD prediction, the presence of a slight deviation from strictly isothermal conditions leads to secondary flows in the reactor that produce deviations from the ideal parabolic laminar flow. The characterization experiments, in conjunction with theory, provide a basis for interpretation of atmospheric chemistry and SOA studies to follow. A 1-D photochemical model within an axially dispersed plug flow reactor (AD-PFR) framework is formulated to evaluate the oxidation level in the reactor. The simulation indicates that the OH concentration is uniform along the reactor, and an OH exposure (OHexp) ranging from ∼ 109 to ∼ 1012 molecules cm−3 s can be achieved from photolysis of H2O2. A method to calculate OHexp with a consideration for the axial dispersion in the present photochemical system is developed.
Revised: 07 Feb 2017 – Accepted: 24 Feb 2017 – Published: 09 Mar 2017
Huang, Y., Coggon, M. M., Zhao, R., Lignell, H., Bauer, M. U., Flagan, R. C., and Seinfeld, J. H.: The Caltech Photooxidation Flow Tube reactor: design, fluid dynamics and characterization, Atmos. Meas. Tech., 10, 839-867, doi:10.5194/amt-10-839-2017, 2017.