Journal cover Journal topic
Atmospheric Measurement Techniques An interactive open-access journal of the European Geosciences Union

Journal metrics

  • IF value: 3.089 IF 3.089
  • IF 5-year<br/> value: 3.700 IF 5-year
    3.700
  • CiteScore<br/> value: 3.59 CiteScore
    3.59
  • SNIP value: 1.273 SNIP 1.273
  • SJR value: 2.026 SJR 2.026
  • IPP value: 3.082 IPP 3.082
  • h5-index value: 45 h5-index 45
Atmos. Meas. Tech., 8, 741-750, 2015
http://www.atmos-meas-tech.net/8/741/2015/
doi:10.5194/amt-8-741-2015
© Author(s) 2015. This work is distributed
under the Creative Commons Attribution 3.0 License.
Research article
12 Feb 2015
Detecting physically unrealistic outliers in ACE-FTS atmospheric measurements
P. E. Sheese1, C. D. Boone2, and K. A. Walker1,2 1Department of Physics, University of Toronto, Toronto, ON, M5S 1A7, Canada
2Department of Chemistry, University of Waterloo, Waterloo, ON, N2L 3G1, Canada
Abstract. The ACE-FTS (Atmospheric Chemistry Experiment – Fourier Transform Spectrometer) instrument on board the Canadian satellite SCISAT has been observing the Earth's limb in solar occultation since its launch in 2003. Since February 2004, high resolution (0.02 cm−1) observations in the spectral region of 750–4400 cm−1 have been used to derive volume mixing ratio profiles of over 30 atmospheric trace species and over 20 atmospheric isotopologues. Although the full ACE-FTS level 2 data set is available to users in the general atmospheric community, until now no quality flags have been assigned to the data. This study describes the two-stage procedure for detecting physically unrealistic outliers within the data set for each retrieved species, which is a fixed procedure across all species. Since the distributions of ACE-FTS data across regions (altitude/latitude/season/local time) tend to be asymmetric and multimodal, the screening process does not make use of the median absolute deviation. It makes use of volume mixing ratio probability density functions, assuming that the data, when sufficiently binned, are at most tri-modal and that these modes can be represented by the superposition of three normal, or log-normal, distributions. Quality flags have been assigned to the data based on retrieval statistical fitting error, the physically unrealistic outliers described in this study, and known instrumental/processing errors. The quality flags defined and discussed in this study are now available for all level 2 versions 2.5 and 3.5 data and will be made available as a standard product for future versions.

Citation: Sheese, P. E., Boone, C. D., and Walker, K. A.: Detecting physically unrealistic outliers in ACE-FTS atmospheric measurements, Atmos. Meas. Tech., 8, 741-750, doi:10.5194/amt-8-741-2015, 2015.
Publications Copernicus
Download
Share