Articles | Volume 8, issue 2
https://doi.org/10.5194/amt-8-751-2015
https://doi.org/10.5194/amt-8-751-2015
Research article
 | 
13 Feb 2015
Research article |  | 13 Feb 2015

Characterization and verification of ACAM slit functions for trace-gas retrievals during the 2011 DISCOVER-AQ flight campaign

C. Liu, X. Liu, M. G. Kowalewski, S. J. Janz, G. González Abad, K. E. Pickering, K. Chance, and L. N. Lamsal

Abstract. The Airborne Compact Atmospheric Mapper (ACAM), an ultraviolet/visible/near-infrared spectrometer, has been flown on board the NASA UC-12 aircraft during the Deriving Information on Surface Conditions from Column and Vertically Resolved Observations Relevant to Air Quality (DISCOVER-AQ) campaigns to provide remote sensing observations of tropospheric and boundary-layer pollutants from its radiance measurements. To assure the trace-gas retrieval from ACAM measurements we perform detailed characterization and verification of ACAM slit functions. The wavelengths and slit functions of ACAM measurements are characterized for the air-quality channel (~304–500 nm) through cross-correlation with a high-resolution solar irradiance reference spectrum after necessarily accounting for atmospheric gas absorption and the ring effect in the calibration process. The derived slit functions, assuming a hybrid combination of asymmetric Gaussian and top-hat slit functions, agree very well with the laboratory-measured slit functions. Comparisons of trace-gas retrievals between using derived and measured slit functions demonstrate that the cross-correlation technique can be reliably used to characterize slit functions for trace-gas retrievals.

Download
Short summary
We characterize the wavelengths and slit functions of Airborne Compact Atmospheric Mapper (ACAM) measurements in ~304--500 nm through the cross-correlation technique. It is necessary to account for atmospheric gas absorption and the ring effect. The derived broadened Gaussian slit functions agree very well with laboratory measurements. Trace gas retrieval comparisons demonstrate that the cross-correlation technique can be reliably used to characterize slit functions.